If your business runs diesel utes or vans, there is a part under the vehicle that can cause a lot of downtime. It is called the diesel particulate filter, or DPF.
Most business owners never think about it until a warning light comes on. By then, a vehicle may already be running poorly or stuck in a reduced power mode.
Perth exhaust and mechanical workshop Genie Exhaust has a plain guide to DPF warning signs, causes and prevention on its website, and much of what follows lines up with that advice.
This post looks at DPFs from a business point of view. What causes problems, how driving habits play a part, and how to keep work vehicles on the road.
What a DPF does
A DPF sits in the exhaust system of many newer diesel vehicles. Its job is to catch soot from the exhaust before it gets into the air.
The filter cannot hold soot forever. It needs to burn it off from time to time. This process is called regeneration.
When regeneration happens as it should, most drivers never notice. When it does not, soot builds up and the filter starts to block.
Why work vehicles are at risk
Many business vehicles are used in ways that make DPF problems more likely.
Short trips are the big one. A tradie doing five jobs a day across nearby suburbs may never drive long enough at steady speed for the filter to clean itself.
Lots of idling is another. Vans that sit running while drivers load or wait can build up soot without the heat needed to burn it off.
Other common causes include:
- Missed or late servicing
- The wrong engine oil for the vehicle
- Poor-quality fuel
- Often running the tank close to empty
- Some performance modifications
The cost of ignoring it
A blocked DPF is more than an annoying light on the dash.
The vehicle may lose power. Some vehicles go into a limp-home mode that limits speed. On some models, a badly blocked filter can stop the engine from restarting.
For a business, that means a driver off the road, jobs pushed back and customers left waiting. The repair can also cost a lot more if the problem is left to get worse.
Warning signs to tell your drivers about
Your drivers are the first to notice when something is wrong. Make sure they know what to look for.
- An orange DPF warning light on the dashboard
- A light that stays on, turns red, or is joined by other warnings
- Loss of power or sluggish acceleration
- Black smoke when accelerating
- A strong, hot smell from the exhaust
Symbols differ between makes, so it helps to keep a copy of the warning light page from each vehicle’s manual in the glovebox.
Simple habits that help
Most DPF care comes down to how the vehicle is driven and serviced.
Where it is safe and practical, a regular stretch of steady driving at highway speed gives the filter a chance to regenerate. Some businesses plan this into a weekly run, such as a supplier pick-up on the freeway.
If a vehicle is mid-regeneration, the engine note may change, the fans may run and idle speed may rise. Drivers should try not to switch off straight away if they notice these signs.
Other good habits:
- Stick to the service schedule in the owner’s manual
- Use the engine oil the manufacturer recommends
- Buy fuel from reliable outlets
- Avoid running the tank close to empty
- Cut down on unneeded idling
Do not remove the filter
Some people suggest removing the DPF to avoid future problems. This is a bad idea for a business.
Removing or tampering with emissions equipment can breach vehicle standards, lead to a defect notice and cause problems with insurance or warranty. Transport WA’s vehicle safety and standards page explains that vehicles need to meet the Australian Design Rules, which include emissions.
If a DPF keeps failing, it is better to find out why and fix the cause.
Think about DPFs when you buy
When you add a new vehicle to the fleet, think about how it will be used.
If most of its work is short trips around town, ask whether a diesel is the best fit. A petrol, hybrid or electric vehicle may suit some roles better.
The Australian Government’s Green Vehicle Guide lets you compare vehicles by fuel use and emissions, which can help with these decisions.
For towing, long country runs or heavy loads, diesel may still make the most sense. Matching the vehicle to the job is the main thing.
Plan for downtime before it happens
Every vehicle will need time off the road at some point. The question is whether that time is planned or forced on you.
Booking services and checks in quieter weeks costs far less than losing a ute in the middle of a busy job. If you have more than one vehicle, stagger the bookings so the whole fleet is never off the road at once.
It also helps to have a backup plan. That might be a hire arrangement, a spare vehicle or an agreement with drivers about sharing when one is in the workshop.
Make it part of driver training
New drivers may have never driven a diesel with a DPF. They may not know what the warning light means or why short trips matter.
Add a short section on DPFs to your vehicle induction. A one-page sheet with the warning signs, good habits and who to call is often enough.
Encourage drivers to report problems early. A driver who feels safe saying “the light came on again” can save the business a much bigger bill.
Keep simple records
A basic log for each vehicle makes it easier to spot problems early.
Note service dates, warning lights, repairs and the kind of driving each vehicle does. If one ute keeps throwing DPF warnings, the log may show it is doing far more short trips than the others.
This also helps when you talk to a mechanic. Clear records give them a head start.
What to do next
Start by checking which vehicles in your business have a DPF. The owner’s manual or your mechanic can tell you.
Brief your drivers on the warning signs and the habits that help. Put the service schedule in a shared calendar so it is not missed.
If a warning light comes on, do not wait. Book the vehicle in with a workshop that knows diesel exhaust systems and ask them to explain what is causing the problem, so you can stop it happening again.

